Open Access Conference Proceedings

Abstract: <div>Currently, polymers are a group of future-proof materials, which, in contrast metals, are characterized by low weight and also are easier to obtain and relatively cheap. However, due to their low surface energy, their use is often limited. [..] Read more

Abstract: <div>The DC-MS magnetron sputtering method is a well-known surface engineering technology and is a very effective technological tool in the processes of producing multi-component coatings. One of the limits of DC magnetron sputtering is the production of metal oxide coatings. [..] Read more

Abstract: <div>The corrosion resistance of the aluminum-based coating deposited on Inconel Alloy 625 by CVD method was investigated. Specimens of 625 Alloy in as-received state and coated were exposed to static liquid lead at 520 °C. [..] Read more

Abstract: <div>Austenitic steel 316L with applied coating was studied to find a suitable material for impeller of main circulation pump at working conditions of small modular lead fast reactor. The chemical compatibility of the materials to the liquid metal environment was evaluated in liquid lead environment containing oxygen to ensure the oxidation while simulating temperature cycling. [..] Read more

Abstract: <div>Electrical discharge machining is one of the main methods of manufacturing technological equipment used in the foundry industry, plastics processing, plastic working, etc. Important elements determining its quality are, apart from the properties of the materials used, the features imparted in the manufacturing processes. [..] Read more

Abstract: The article presents research on the influence of single-mode and multi-mode fiber lasers on the micromachining effects of a diamond-like carbon (DLC) coating surface. DLC coatings are a form of amorphous carbon consisting of sp2 bonds characteristic of graphene and sp3 bonds found in diamond. [..] Read more

Abstract: <div>The paper presents the influence of laser beam on properties of borochromized surface layers produced on C45 steel. Microstructure, phase composition, microhardness as well as fracture toughness of newly formed layers were studied. [..] Read more

Abstract: <div>Hot-dip galvanising is one of the most widely used methods for protecting structural steel against corrosion. This article examines the quality and thickness of the Zn coating on Kosmalt E300T low carbon deep-drawing structural steel Kosmalt E300T MAG-welded. [..] Read more

Abstract: <div>In this study, the nature of boriding surface treatment mechanism of the steel prestressing strand is evaluated and then the corrosion resistance of the borided steel in hydrochloric acid is assessed (detection of the content of released iron and manganese in the exposure solution). The effect on the bond strength of the treated steel prestressing strand with normal strength concrete is also evaluated (pull-out test). [..] Read more

Abstract: <div>Drilling has an essential place in machining processes. Therefore, optimizing the parameter levels used in drilling is valuable regarding process quality. [..] Read more

Abstract: <div>Titanium and its alloys offer a unique combination of properties (e.g. high specific strength, biocompatibility and corrosion resistance). [..] Read more

Abstract: <div>Slags formed during pyrometallurgical extraction of zinc and lead contain numerous metals, and can provide a valuable source of these. Metal recovery from Zn-Pb slags can be accomplished using a pyrometallurgical method consisting in recovering materials at sufficiently high temperatures by transferring them to specific condensed phases (including metallic alloys) or the gas phase with subsequent condensation. [..] Read more

Abstract: <div>Gas aggregation sources based on physical vapour deposition are nowadays commonly used for the preparation of metallic nanoparticles or composite nanostructures containing metals, oxides, nitrides, polymers, etc. The most common configuration of the device for the preparation of core-shell Ni-Ti nanoparticles consists of the primary aggregating source producing the Ni core followed by a second chamber with a Ti target overcoating the core by a shell. [..] Read more

Abstract: Corrosion and material selection are critical challenges in the practical design and operation of power plants, chemical plants, pipeline transportation systems, and wells. All of these are components of the systems used to capture and store carbon dioxide (CCS). [..] Read more

Abstract: <div>This work deals with the increase in mechanical and utility properties of diamond grinding wheel with controlled porosity prepared by the sintering along the diamond grain boundary using binder material based on Cu-Sn-Ti alloy with subsequent hot isostatic pressing (HIP). The structure of diamond grinding wheel contained after sintering a large proportion of open porosity (35 to 39 %), which ensures a very good supply of coolant to the grinding point and at the same time removes the ground material from the grinding point. [..] Read more

Abstract: <div>Titanium nanoparticles are renowned for their high strength-to-weight ratio, excellent corrosion resistance, and biocompatibility, making them promising for various advanced applications. This study explores the properties of Ti nanoparticles, mainly focusing on dislocation analysis. [..] Read more

Abstract: <div>During the operation of fusion devices, plasma facing components (PFCs) are subjected to high thermal loads. These result in mechanical stresses and various forms of degradation and microstructural changes in the material volume. [..] Read more

Abstract: <div>Aluminum alloy rims can be produced by the following methods: forging, twisting, gravity casting and low-pressure casting. Irrespective of the advantages and disadvantages of each of these technologies, by far the most common way of producing Al-Si alloy rims is low-pressure casting (up to 0.2 MPa). [..] Read more

Abstract: <div>Plasma transfer arc surfacing is very perspective technology, which is currently used to create layers with special properties such as corrosion resistance, wear resistance or resistance against high temperatures. In case of Nickel based alloys, it is possible to increase hardness and wear resistance using heat treatment, but it is very expensive and time consuming and impossible to apply on different materials (Nickel based coating and alloy steel base material). [..] Read more

Abstract: <div>The work deals with the study of progressive materials based on a matrix of NiAl and a reinforcing FeSi phase. The fabrication is realized through vacuum induction melting and centrifugal casting. [..] Read more