MORÁVEK Tomáš Masaryk University, Faculty of Science, Department of Physical Electronics, Kotlářská 2, Brno, Czech Republic
Co-authors: RÁHEĽ Jozef
Abstract: The sintering of plasma pre-treated alumina sub-micron powders results in finer microstructure of final ceramics. This highly interesting and potentially useful result motivates us to study the microscopic changes on plasma treated alumina powders. [..] Read more
KYNCLOVÁ Hana Department of Microelectronic, Faculty of Electrical Engineering and Communications, Brno University of Technology, Brno, Czech Republic, EU
Co-authors: SMILEK Jiří PRÁŠEK Jan KLUČÁKOVÁ Martina SEDLÁČEK Petr HUBÁLEK Jaromír
Abstract: Nanoporous alumina is useful material for development of electrochemical sensors including filtration, molecule sorting and subsequent detection. Big advantage of alumina is possibility to reliably control size of nanopores and membrane thickness. [..] Read more
Štěpánová Vlasta Department of Physical Electronics, Faculty of Science, Masaryk University, Kotlářská 2, 611 37 Brno, Czech Republic
Co-authors: Slavíček Pavel Valtr Miroslav Buršíková Vilma Stupavská Monika
Abstract: Increase of surface wettability on glass was observed after atmospheric pressure plasma treatment using two different plasma sources. First used plasma source was Diffuse coplanar surface barrier discharge (DCSBD) and second was commercial gliding arc. [..] Read more
Herrera W. T. Ceramics and Nanomaterials Laboratory, Faculty of Physical Science, National University of San Marcos, Ap. Postal 14-0149, Lima 1-Peru, wth81@yahoo.com, aguivar@gmail.com;
Co-authors: Ramos Guivar Juan A. González J.C. Baggio-Saitovitch E. M.
Abstract: The preparation and functionalization of iron oxide magnetic nanoparticles (MNPs) are of great importance in a diverse range of applications. However, their structural and magnetic properties can be influenced by the process of coating making these MNPs undesirable for certain applications. [..] Read more
KŘÍŽOVÁ Hana Technical University of Liberec, Faculty of Textile Engineering, Studentská 2, 461 17 Liberec, Czech Republic, EU, hana.krizova@tul.cz, jakub.wiener@tul.cz
Co-authors: WIENER Jakub
Abstract: A new nanofibrous membrane with iremarkable chemical and strength properties was prepared through an interaction between polyamide nanofibres and oak bark extract, which is rich in the content of hydrolysable tannins.The aim of this study was to verify the bond strength of tannins and polyamide nanofibres depending on the different pH of the aqueous medium. Read more
FIJALKOWSKI Mateusz Technical University of Liberec, Studentska 2, Liberec, Czech Republic, EU mateusz.fijalkowski@tul.cz
Co-authors: ADACH Kinga Marešová Helena KROISOVÁ Dora
Abstract: The aim of the work is to compare the biogenic silica nanoparticles, which have been isolated from rice husks with synthetically produced silica brand Cab-O-Sil LM-150. The comparison is based on an evaluation of the two systems from the point of view of chemical composition, particle size and structure, ability to form clusters of particles and interactions with selected bacterial systems. [..] Read more
SVOBODA Radek VŠB-Technical University of Ostrava, Nanotechnology Centre, Ostrava - Poruba, Czech Republic, EU
Co-authors: LESŇÁK Michal ŠIGUTOVÁ Radka PIŠTORA Jaromír
Abstract: SPRi (Surface Plasmon Resonance Imaging) biosensors are used for detection in real time with advantage of processing large number parallel measurements. Our goal is fast detection of low concentrations proteins. [..] Read more
PILGROVÁ Tereza Brno University of Technology, Faculty of Chemistry, Institute of Physical and Applied Chemistry, Purkyňova 464/118,61200 Brno, Czech Republic, EU, xckrutisova@fch.vutbr.cz
Co-authors: PEKAŘ Miloslav
Abstract: Hyaluronan as negatively charged polyelectrolyte can interact with positively charged surfactant micelles via electrostatic interactions to form core-shell like nanoparticles. These aggregates can solubilize hydrophobic active substances; therefore, they are potential carriers in drug delivery applications. [..] Read more
HOLÍNKOVÁ Petra Brno University of Technology, Faculty of Chemistry, Institute of Physical and Applied Chemistry, Purkyňova 464/118, 612 00 Brno, xcucekajova@fch.vutbr.cz
Co-authors: MRAVEC Filip PEKAŘ Miloslav
Abstract: This paper deals with the fluorescence study of microviscosity changes of hydrogel composed by hyaluronan and cationic surfactant cetyltrimethylammonium bromide (CTAB) during fortnight-ageing. The steady state anisotropy values obtained in the experiments were used to estimate the microviscosity of the corresponding hydrogel regions. [..] Read more
DĚDKOVÁ Kateřina Nanotechnology Centre, VSB - Technical University of Ostrava, Ostrava-Poruba, Czech Republic, EU
Co-authors: MAMULOVÁ KUTLÁKOVÁ Kateřina MATĚJOVÁ Kateřina KUKUTSCHOVÁ Jana
Abstract: During the past few years there has been a remarkable growth of research activities exploring properties and biomedical applications of nano-sized materials. Size, shape, size distribution, morphology, surface functionalization and stability of nanomaterials have an influence on resulting biological and other effects of nanomaterials. [..] Read more
KROČILOVÁ Nikola Institute of Physiology of the Czech Academy of Sciences, Prague, Czech Republic
Co-authors: BAČÁKOVÁ Lucie PAŘÍZEK Martin HAVLÍKOVÁ Jana MOTARJEMI Hooman MOLITOR Martin GABOR Roman MARVAN Jaroslav
Abstract: Adipose-derived stem cells (ASCs) are of a great importance for bone tissue engineering. We compared ASCs obtained by liposuction under two pressures (-200 mmHg and -700 mmHg). [..] Read more
DOUBKOVA Martina Institute of Physiology of the Czech Academy of Sciences, Prague, Czech Republic, EU, Martina.Doubkova@fgu.cas.cz
Co-authors: BACAKOVA Lucie PARIZEK Martin VANDROVCOVA Marta MUSILKOVA Jana LISA Vera GABOR Roman MARVAN Jaroslav
Abstract: Titanium and its alloys are widely used as hard tissue implants for their high biocompatibility and suitable physical properties. Along with other surface treatment methods, anodization technique is known to enhance osseointegration. [..] Read more
PAZOURKOVÁ Lenka VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, lenka.pazourkova@vsb.cz
Co-authors: DROBÍKOVÁ Klára RELI Magda SIMHA MARTYNKOVÁ Gražyna
Abstract: In this study the surfaces of pure polyethylene and polyethylene filled with organo-modified vermiculite were prepared and compared. Both polymers were prepared from industrial polyethylene powders. [..] Read more
HÁJKOVÁ Pavlína Research Institute of Inorganic Chemistry, Ústí nad Labem, Czech Republic, pavlina.hajkova@vuanch.cz
Co-authors: VOLESKÝ Lukáš ČMELÍK Jiří
Abstract: The aim of the presented paper was the investigation of the barrier properties of Diamond Like Carbon (DLC) thin films used for biomedical applications. The DLC films were prepared by the Plasma Enhanced Chemical Vapour Deposition (PECVD) from methane. Stainless steel AISI type 316L was used as a substrate. [..] Read more
JuRkovÁ Blanka Institute of Physics, AS CR, v.v.i., Prague, Czech Republic
Co-authors: Kozak Halyna Artemenko Anna UKRAINTSEV Egor Beranová Jana Konopásek Ivo Kromka Alexander
Abstract: Bacteria attached to solid surfaces are able to form bacterial biofilms which present serious problems both in healthcare and in industrial applications. Naturally, the development of anti-adhesive coatings that prevent bacterial attachment is of great importance nowadays. [..] Read more
HLAVÁČ Dominik VŠB - TECHNICAL UNIVERSITY OF OSTRAVA, 17. listopadu 15, 708 33 Ostrava - Poruba, Czech Republic, dominik.hlavac@vsb.cz.
Abstract: This work is focused on exploration of capability of zero charged clay minerals kaolinite and pyrophyllite to carry antibacterial chlorhexidine and antifungal nystatin, respectively. Investigation of host-guest interaction was based on force field molecular dynamics which was performed on model surfaces in periodic boundary conditions. [..] Read more
ŽÁKOVÁ Pavlína University of Chemistry and Technology Prague, Department of Solid State Engineering, Prague, Czech Republic, EU, pavlina.zakova@vscht.cz
Co-authors: SLEPIČKOVÁ KASÁLKOVÁ Nikola SLEPIČKA Petr ŠVORČÍK Václav
Abstract: Various carbon nanostructures are widely researched for use in a number of medical applications. We study the surface properties and cell-substrate interactions of amine functionalized carbon nanoparticles (CNPs) grafted on biopolymer film. [..] Read more
SVOBODOVA Zuzana University of Pardubice, Faculty of Chemical Technology, Department of Biological and Biochemical Sciences, Pardubice, Czech Republic, EU
Co-authors: KRULISOVA Pavla CERNA Michaela JANKOVICOVA Barbora BILKOVA Zuzana
Abstract: In recent years, microfluidics has shown considerable promise for improving diagnostics and biology research. Certain properties of microfluidic technologies, such as rapid sample processing and the precise control of fluids in an assay, have made them attractive candidates to replace traditional experimental approaches [1]. [..] Read more
BEIER Oliver Innovent e.V., Pruessingstraße 27B, D-07745 Jena, Germany, ob@innovent-jena.de
Co-authors: PFUCH Andreas SCHMIDT Jürgen SPANGE Sebastian FRIEDRICH Louis
Abstract: Biocompatible and bactericidal coatings were deposited onto different titanium based implant materials. For this the plasma chemical oxidation (PCO) process as well as the atmospheric pressure plasma chemical vapour deposition (APCVD) was used successively. [..] Read more
XHAXHIU Kledi Department of Chemistry, Faculty of Natural Sciences, University of Tirana, Blv. Zog I, No. 2/1001 Tirana, Albania
Co-authors: HADDAD Yazan KOPEL Pavel ADAM Vojtěch KIZEK Rene ZITKA Ondrej
Abstract: Magnetic nanoparticles offer several advantages for isolation of biological materials. Since they are broadly used in diagnostic immunoassays and in various reactions involving enzymes, proteins, and DNA, this study considers the interaction of four surface modified magnetic microparticles with selected DNA fragments. [..] Read more
Scroll to Top