Open Access Conference Proceedings

Abstract: The main objective is to model the plastic behavior of the three aluminum alloys 1050, 2024 and 7075.In the first part, using the experimental results of uniaxial tensile tests for each alloy and in the three main directions, and using a strategy of identifying the parameters of each work hardening model studied, Hollomon, Swift and Voce, we have created an empirical database of 1050, 2024 and 7075 aluminum series alloys.In the second part, one established the curves of uniaxial tensile curve by using the work hardening laws and the experimental parameters obtained in the first part. The comparison with the experimental data shows that the plastic behavior model can successfully describe with the use of appropriate workhardening law for each alloy.. [..] Read more

Abstract: Eutectic high-entropy alloys have become a significantly studied type of material due to their combination of strength and ductility. However, previous research has focused primarily on manufacture, solidification behaviour and mechanical properties. [..] Read more

Abstract: The AlSi9Cu3 alloy, conventionally produced by High-Pressure Die Casting (HPDC), is extensively used in the automotive industry for its high specific strength, good heat and electric conductivity. There is currently an effort to produce this alloy using selective laser melting technology (SLM) due to design possibilities such as producing geometrically complex and lightweight products. [..] Read more

Abstract: The immiscible Cu-Fe system is often used as a base for advanced heterogeneous alloys. With a suitable selection of alloying elements, it is possible to alloy individual phases and therefore tailor microstructure and final properties of a material as needed. [..] Read more

Abstract: During the operation of fusion devices, the plasma facing components are exposed to high thermal loads from the plasma resulting in mechanical stress formation, as well as to electromagnetic forces and severe particle fluxes. Materials used for this application have to sustain demanding operational conditions. [..] Read more

Abstract: Cobalt superalloys based on the Co-Al-W system are a new group of heat-resistant materials, which have attracted attracted the interest of researchers in 21th century. The advantage of the new materials over conventional cobalt alloys is the strengthening mechanism based on a microstructure of the γ-γ′ type. [..] Read more

Abstract: We follow an alnico alloy sample to non destructive testing using X-ray radiography. X-ray Computed Tomography (CT), also widely known as MicroCT, is a proven method for not only checking the structural integrity of casting parts - for example for porosity - but also for checking a dimensional accuracy. [..] Read more

Abstract: In this article, the non-destructive testing of alnico alloys was carried out by various methods. Paper provides and researches about non-destructive testing (NDT) methods. [..] Read more

Abstract: Magnesium-intermetallics laminated composites have been fabricated through reactive bonding at 490 °C in vacuum using magnesium sheets and copper foils. Investigations were concerned with the structural transformations of a Mg-Cu couple boundary. [..] Read more

Abstract: This paper deals with approximate physical modelling of aluminum melt degassing, performed under low-pressure die casting conditions of aluminum castings. The modelling took place on an aquatic physical model on a 1:1 scale to the operating conditions, constructed in the laboratories of ITB in ČB. [..] Read more

Abstract: The aim of this work is a proposal of innovative technology of metal waste processing - sludge and filtration cakes from galvanizing plants. The paper deals with possibilities of zinc obtaining from waste of galvanic sludge, which arises during galvanic plating. [..] Read more

Abstract: The technology of high-pressure die casting thin-walled castings requires increased demands on the stability of technological processes and pressure casting parameters. The wall thickness of the studied zinc alloy castings (ZP0410) ranges from 0.4 to 1.2 mm. [..] Read more

Abstract: Nowadays, implants are predominantly made of metallic materials that have two main problems. The first resides in the modulus of elasticity being higher than the one of the human bone (10-20 GPa), resulting in stress shielding and subsequent implant failure. [..] Read more

Abstract: The use of salt mixtures properties is considered in many future technologies, such as energy storage or medium for nuclear reactors. The key question is to choose a suitable construction material for these devices operating at high temperatures in a corrosive environment. [..] Read more

Abstract: The article analyzes the presence of selected metals, classified as Technology Critical Elements (TCE), in electrical and electronic devices. Metals belonging to the group of critical metals (Germanium), strategic metals (Tellurium), and very toxic elements (Thallium) were analyzed. [..] Read more

Abstract: The paper deals with the possibility of obtaining zinc from waste galvanic sludge, which arises during galvanic plating. Galvanic sludges, which contain significant amounts of heavy metals, form waste suitable for hydrometallurgical recycling. [..] Read more

Abstract: Based on the samples of Shanghai and Shenzhen listed companies in China's steel industry from 2015 to 2020, this paper establishes a fixed effect model to analyze the influence of heterogeneous human capital on enterprise value. The results show that the knowledge-based human capital has less positive impact on the enterprise value of steel enterprises, but the technology-based human capital has a significant impact on them. [..] Read more

Abstract: This paper takes China's listed iron and steel corporations from 2016 to 2020 as samples to discuss the relationship between corporate environmental responsibility and corporate value. Then, analyzes the moderating effects of corporate ownership and industry concentration on the above relationship by establishing econometric models based on the resource dependence theory. [..] Read more

Abstract: The paper deals with the application of automatically controlled vehicles in the metallurgical industry. The aim of the paper is to present a proposal for innovative safety of operating workers in the vicinity of an automatically controlled fire truck during the production of coke. [..] Read more

Abstract: The paper deals with the processes of digitization of metallurgical processes, its possibilities and limitations caused by the specifics of these operations. Digitization is the process of introducing the use of digital technologies in various areas of production and society. [..] Read more