Proceedings
Back
Conference Proceedings - METAL 2014
23rd International Conference on Metallurgy and Materials
May 21 - 23, 2014 / Hotel Voronez I, Brno, Czech Republic, EU
www.metalconference.eu
ISSN: 2694-9296
ISBN: 978-80-87294-52-9
Proceedings of the conference were published in Web of Science and Scopus.
Read
more
Past events
Table of Contents
Download
JIRSÁK Petr VSE - University of Economics, Prague, Czech Republic, EU, jirsakp@vse.cz
Co-authors:
HOLMAN David
Abstract:
The aim of this article is to identify the differences between SCM concepts, particularly LeanSCM, AgileSCM,
ResilientSCM and GreenSCM. These concepts are commonly considered as SCM paradigms by many SCM
academics and professionals. [..]
Read more
HUDÁK Ján Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Slovakia, EU, jan_hudak@stuba.sk, natalia.hornakova@stuba.sk, helena.vidova@stuba.sk
Co-authors:
HORŇÁKOVÁ Natália
VIDOVÁ Helena
Abstract:
Simulation, as a tool for acquiring the optimal solution, is also representing a support tool that allows managers
to test the effects of their decisions on the simulation model and not directly on a real system. This model also
enables to implement various experiments, analyze them, evaluate them and consequently performs the
optimization. [..]
Read more
BORKOWSKI Stanislaw Czestochowa University of Technology, Faculty of Management, Institute of Production Engineering, Czestochowa, Poland, EU, bork@zim.pcz.pl, manuela@gazeta.pl, jmarti@o2.pl
Co-authors:
INGALDI Manuela
JAGUSIAK-KOCIK Marta
Abstract:
The own technologies and the quality of the finished products affect the position of the company in the market and hence the existence of this company. In the paper structure of nonconformities of the metal headwood screws was presented. [..]
Read more
BORKOWSKI Stanisław Czestochowa University of Technology, Faculty of Management, Institute of Production Engineering, Czestochowa, Poland, EU, iip@zim.pcz.pl
Co-authors:
JAGUSIAK-KOCIK Marta
INGALDI Manuela
Abstract:
This study presents the evaluation, based on the principles of Toyota management (BOST method) of functioning of the manufacturing process in production of components for combine harvesters such as: straw chopper knives and knife sections. These parts perform specific motion during work and require maintaining the dimensions and weight within specific tolerances. [..]
Read more
JANOVSKÁ Kamila VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, kamila.janovska@vsb.cz; milan.stoch@vsb.cz
Co-authors:
GAJDA Jakub
MARTINKOVÁ Petra
Stoch Milan
Abstract:
In the period from 2003 to 2004 there was a dispute about the supply of liquid steel pig iron between two companies. To resolve this dispute had to be an expert to determine the usual price of liquid steel pig iron in the Moravian-Silesian Region in this period. [..]
Read more
JURSOVÁ Simona VSB - Technical University of Ostrava, Centre ENET, Ostrava, Czech Republic, EU, simona.jursova@vsb.cz, jaroslav.frantik@vsb.cz
Co-authors:
PUSTĚJOVSKÁ Pavlína
BROŽOVÁ Silvie
FRANTÍK Jaroslav
Abstract:
The paper deals with possibilities of improvement of ironmaking technology in economic point of view. The optimization of blast furnace feedstock is one of approaches how to reach it. [..]
Read more
JUŘICOVÁ Anna VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, ajuricova@seznam.cz
Abstract:
Industry is a fundamental sector of the world and national economy. It is an indicator of country’s development, the backbone of the national economy and it has a substantial impact on the regional structure. [..]
Read more
KLAPUT Pavel VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, pavel.klaput@vsb.cz, antonia.holenova.st@vsb.cz, jiri.plura@vsb.cz
Co-authors:
HOLEŇOVÁ Antónia
PLURA Jiří
Abstract:
The quality of metallurgical products is affected not only by the quality of the production process, but also by the quality of the measured data through which is the production process controlled. For this reason one of the prerequisites for success in the market is quality of the measurement system. [..]
Read more
KOSSAKOWSKI Paweł Grzegorz Kielce University of Technology, Faculty of Civil Engineering and Architecture, Department of Strength of Materials and Concrete Structures, Kielce, Poland, EU, kossak@tu.kielce.pl
Abstract:
The study deals with numerical modelling of the ductile fracture and failure of elements subjected to static
tension in the spatial stress state. The analysis was conducted for notched specimens made of S235JR steel
in the high stress triaxiality condition. [..]
Read more
KONSTANCIAK Anna Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Czestochowa, Poland, EU, akonstan@zim.pcz.pl
Abstract:
In this paper, the production, export, import of coke in Poland and in the world during last ten years are
presented. There are also shown the reasons of changes in coke production and price. [..]
Read more
BESTA Petr VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, petr.besta@vsb.cz
Co-authors:
MIKOLÁŠ Milan
HAVERLAND Jindřich
HULA Lukáš
HENDRYCH Miroslav
PROSICKÝ Petr
KUBICA Stanislav
Abstract:
The quality of ore raw materials significantly affects the technological aspects of the blast furnace process. The comparison of iron ores is complicated because of the wide range of parameters which can be used to evaluate the ores. [..]
Read more
KUTÁČ Josef VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, josef.kutac@vsb.cz
Co-authors:
SAMOLEJOVÁ Andrea
STOCH Dominika
ANDRUŠKA Libor
Abstract:
This article is focused on the issue of overhead costs allocation used for target costing. The first phase is allocation of overhead costs of secondary (supporting) cost centres to the primary (production) cost centres. [..]
Read more
KUŻDOWICZ Dorota University of Zielona Góra, Zielona Gora, Poland, EU, d.kuzdowicz@wez.uz.zgora.pl
Co-authors:
KUŻDOWICZ Paweł
WITKOWSKI Krzysztof
Abstract:
Debt financing is one of the forms of financing a company’s operations. It includes long- and short-term
liabilities which may have various forms depending on many factors, e.g., the entity’s needs and financial
condition. [..]
Read more
KUŻDOWICZ Paweł University of Zielona Góra, Zielona Gora, Poland, EU, p.kuzdowicz@wez.uz.zgora.pl, a.saniuk@iizp.uz.zgora.pl, d.kuzdowicz@wez.uz.zgora.pl
Co-authors:
SANIUK Anna
KUŻDOWICZ Dorota
Abstract:
The Article is dedicated to the calculation of metal additives costs in the automotive industry. The selected methods applied in practice have been critically assessed. [..]
Read more
KYNCL Nicole Commercial foundry of gray and nodular cast iron Turnov, Prepere, Czech Republic, EU, kyncln@slevarna-turnov.cz
Abstract:
In the article are described individual processes in foundry production and all workplaces are subjected to
analysis of factors determining the formation of critical and non-critical sources. For critical sources are
described the options to increase their capacity and performance to elimination the mobility of constraints in
whole production process depending on the assortment to be produced.. [..]
Read more
LAMPA Martin VSB - Technical University of Ostrava, Ostrava, Czech republic, EU, martin.lampa@vsb.cz, andrea.samolejova@vsb.cz, martin.cech@vsb.cz
Co-authors:
SAMOLEJOVÁ Andrea
ČECH Martin
Abstract:
One of the main problems companies have to solve is the distribution of resources among the potential
beneficiaries. In many cases, this problem can be presented as a linear programming task with a linear
objective function and constraining conditions. [..]
Read more
LENORT Radim VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, radim.lenort@vsb.cz
Co-authors:
BARAN Joanna
WYSOKIŃSKI Marcin
Abstract:
The main purpose of this paper is to compare the efficiency of sector manufacturing base metal in 25 European countries. The study applies Data Envelopment Analysis (DEA), which is a non-parametric method based on production theory and the principles of linear programming. [..]
Read more
LENORT Radim SKODA AUTO University, Mladá Boleslav, Czech Republic, EU, lenort@is.savs.cz, stas@is.savs.cz
Co-authors:
GRAKOVA Ekaterina
KARKULA Marek
WICHER Pavel
STAŠ David
Abstract:
For effective management of supply chain resilience is necessary to use advanced quantitative methods. The authors recommend create the simulation based decision support models. [..]
Read more
MAROUŠEK Roman ŠKODA AUTO University, Mlada Boleslav, Czech Republic, EU, marousek12@gmail.com, novotny78@hotmail.com
Co-authors:
NOVOTNÝ Petr
Abstract:
FMEA method is well known as a tool used especially within the automotive industry. Its purpose is to review
risk and increase reliability of product and/or process. [..]
Read more
MRÁZEK Martin VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, martin.mrazek86@gmail.com
Co-authors:
FIRKOVÁ Lenka
BABIŠ Pavel
Abstract:
Within the survey focused on perceptions and use of controlling in Czech industrial companies, it was found
that the most commonly used form of controlling is the cost controlling. Currently all enterprises are trying to
be cost-effective. [..]
Read more