Proceedings
Back
Conference Proceedings - METAL 2020
29th International Conference on Metallurgy and Materials
May 20 - 22, 2020 / Brno, Czech Republic, EU
www.metalconference.eu
ISSN: 2694-9296
ISBN: 978-80-87294-97-0
Proceedings of the conference were published in Web of Science and Scopus.
Read
more
Past events
Table of Contents
Download
MATĚJÍČEK Jiří Institute of Plasma Physics, Czech Academy of Sciences, Prague, Czech Republic, EU, matejicek@ipp.cas.cz, klecka@ipp.cas.cz, cizek@ipp.cas.cz, veverka@ipp.cas.cz, vilemova@ipp.cas.cz, chraskat@ipp.cas.cz
Co-authors:
KLEČKA Jakub
CIZEK Jan
VEVERKA Jakub
VILÉMOVÁ Monika
CHRÁSKA Tomáš
GANESH Vishnu
DOI: https://doi.org/10.37904/metal.2020.3548, 756-763
Abstract:
For future fusion reactors, materials able to withstand harsh environments are needed. In particular, this concerns the plasma-facing components which are foreseen to consist of tungsten-based plasma-facing armor and structural and cooling part made of steel. [..]
Read more
ABRASHOV Aleksey MUCTR - D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia, abr-aleksey@yandex.ru
Co-authors:
KOLESNIKOVA Anastasiya
GRIGORYAN Nelya
VAGRAMYAN Tigran
DOI: https://doi.org/10.37904/metal.2020.3549, 764-769
Abstract:
Recently, as an alternative to chromate protective layers at aluminum and its alloys, worldwide are used nanoscale adhesive coatings, obtained from hexafluorozirconic and hexafluorotitanic acids. The present study is devoted to the technology of development of these coatings.The process of deposition of titanium, zirconium-containing coatings at aluminum alloy 5556 is developed. [..]
Read more
SIMONOVA Maria MUCTR - D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia, simonovamas11@rambler.ru
Co-authors:
ABRASHOV Aleksey
GRIGORYAN Nelya
VAGRAMYAN Tigran
MEN'SHIKOV Vladimir
DOI: https://doi.org/10.37904/metal.2020.3550, 770-775
Abstract:
The disadvantage of magnesium alloys is their low corrosion resistance due to high electronegativity. One of the most effective methods to improve the corrosion resistance of magnesium alloys is to form a conversion adhesive coating on their surface, followed by applying paintwork materials. [..]
Read more
KESLOVÁ Anna Research and Testing Institute, Tylova 46, Pilsen, 301 00, Czech Republic, EU
Co-authors:
HOUDKOVÁ Šárka
VOSTŘÁK Marek
ANTOŠ Jakub
DOI: https://doi.org/10.37904/metal.2020.3551, 776-781
Abstract:
Thermally sprayed coatings are now used in many sectors of industry. In order to select the right material for a given application, it is necessary to know in detail the key properties of the coatings under consideration. [..]
Read more
SHCHERBINA Ekaterina MUCTR - D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia, katerina.sherbin@mail.ru
Co-authors:
ABRASHOV Aleksey
GRIGORYAN Nelya
ALESHINA Venera
VAGRAMYAN Tigran
MEN’SHIKOV Vladimir
DOI: https://doi.org/10.37904/metal.2020.3552, 782-787
Abstract:
Absorbing surfaces of solar receivers are coated with black chrome, which provides the surface of steel or aluminum tubes with good absorption properties. However, the chrome coating does not protect well against corrosion because of its high porosity and high internal stresses, which cause a cracking of coatings. [..]
Read more
MSALLAMOVÁ Šárka University of Chemistry and Technology Prague, Prague, Czech Republic, EU, msallams@vscht.cz
Co-authors:
KOUŘIL Milan
MÍČEK František
POPOVA Kateryna
YERBE Jessika
DOI: https://doi.org/10.37904/metal.2020.3553, 788-792
Abstract:
A lead was used in the past in a variety of applications for example for roofs of churches, garden ornaments, lead seals, and organ pipes. Lead alloys are susceptible to a corrosion attack in an environment containing volatile organic compounds especially acetic acid vapors. [..]
Read more
SYROVÁTKA Šimon Department of Machining Technology, University of West Bohemia, Univerzitni 8, 30100 Pilsen, Czech Republic, EU, simonsyr@students.zcu.cz
Co-authors:
MARTAN Jiří
DOI: https://doi.org/10.37904/metal.2020.3554, 793-798
Abstract:
One of the main benefits of ultrashort laser micromachining is the possibility of preparing various surface structures, including a diversity of shapes and dimensions. The goal of this paper was to fabricate hydrophobic surface structures and to study coherency between the wettability and antibacterial properties of these structures for their further ways of application. [..]
Read more
PAPADATU Carmen-Penelopi Dunarea de Jos University of Galati, 47 Domneasca street, 800080, Romania, EU, papadatu.carmen@yahoo.com
DOI: https://doi.org/10.37904/metal.2020.3555, 799-804
Abstract:
Plasma nitriding applied after a non-conventional treatment in magnetic field to the steel used in industry, have been studied in this paper. It have been demonstrated that the energy of the magnetic field intervenes in the balance of the global power of the phase transformations in solid state altering the thermodynamics, kinetics and the mechanisms of processes, the structures and some properties of the steel. [..]
Read more
Averina Julia Russian University of Chemical Technology D.I. Mendeleev, 125047, Russia, Moscow, Miusskaya pl., 9, averinajm@mail.ru
Co-authors:
Kalyakina Galina
Boldyrev Veniamin
Cherednichenko Alexander
Rybina Evgenia
DOI: https://doi.org/10.37904/metal.2020.3556, 805-809
Abstract:
Chrome plating is widely used as a protective and decorative coating and to increase the wear resistance of measuring and cutting tools. To improve the properties of the chrome coating, nanosized particles are coprecipitated with it. [..]
Read more
PRZESMYCKI Aleksander Institute of Manufacturing Technologies, Warsaw University of Technology, Warsaw, Poland, EU, aleksander.przesmycki@pw.edu.pl
Co-authors:
SAŁACIŃSKI Tadeusz
WINIARSKI Maciej
CHMIELEWSKI Tomasz
ŚWIERCZ Rafał
CIARCIŃSKI Daniel
DOI: https://doi.org/10.37904/metal.2020.3557, 810-815
Abstract:
The article presents the characteristics of ceramic tools designed to improve the condition of the surface layer of workpieces. After milling or turning, the surface layer of the workpiece often has several disadvantages, such as burrs or uneven roughness. [..]
Read more
BRAJČINOVIĆ Sandra University of Zagreb, Faculty of Metallurgy, Sisak, Republic of Croatia, EU smitic@simet.unizg.hr, begic@simet.unizg.hr, slokar@simet.unizg.hr
Co-authors:
BEGIĆ HADŽIPAŠIĆ Anita
SLOKAR BENIĆ Ljerka
DOI: https://doi.org/10.37904/metal.2020.3558, 816-821
Abstract:
This paper presents the results of testing the corrosion behaviour of K110 tool steel for cold work in industrial emulsion medium (Lenox Band-Ade semi-synthetic oil + water, in a ratio of 1:10), water and 3.5% NaCl medium. Using the method of electrochemical impedance spectroscopy (EIS) and Tafel extrapolation, electrochemical measurements were performed in order to determine the corrosion parameters. [..]
Read more
Vavřík Jaroslav COMTES FHT, Dobřany, Czech Republic, EU, jvavrik@comteshft.cz
Co-authors:
Hrbáčková Taťána
Salvetr Pavel
Brázda Michal
DOI: https://doi.org/10.37904/metal.2020.3559, 822-826
Abstract:
This paper explores a protective stellite coating on 1.4922 martensitic steel. Stellite coatings are often used to improve the properties of the part’s surface. [..]
Read more
BELYAEV Igor Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia, belyaev-iv54@yandex.ru
Co-authors:
FROLOV Kirill
STEPNOV Aleksey
BAZHENOV Viacheslav
KIREEV Andrey
DOI: https://doi.org/10.37904/metal.2020.3560, 827-832
Abstract:
Anticorrosive Al-Zn coatings applied on Nd-Fe-B permanent magnets were studied. The coatings were deposited on the surface of permanent magnets by high-speed cold spraying using various temperature conditions. [..]
Read more
BARTKOWSKA Aneta Poznan University of Technology, Faculty of Materials Engineering and Technical Physics, Poznan, Poland, EU, aneta.bartkowska@put.poznan.pl
Co-authors:
BARTKOWSKI Dariusz
JURČI Peter
PRZESTACKI Damian
DOI: https://doi.org/10.37904/metal.2020.3561, 833-839
Abstract:
The paper presents the results of laser processing of diffusion boronized layer on 145Cr6 tool steel. The aim of the study was to investigate the microstructure, phase composition analysis, microhardness as well as corrosion resistance of the newly-formed layer. [..]
Read more
MARKOVÁ Kristýna VŠB – Technical University of Ostrava, 17. listopadu 15/2172, Ostrava 708 33, Czech Republic, EU, kristyna.markova.st@vsb.cz
Co-authors:
PAVLOVSKÝ Jiří
LANGOVÁ Šárka
PÁNEK Petr
DOI: https://doi.org/10.37904/metal.2020.3535, 840-845
Abstract:
The corrosion inhibition of steel in the hydrochloric acid solution by N-butylquinolinium bromide and 1-octyl-3-methylimidazolium chloride was investigated using electrochemical and weight loss methods. Both compounds under investigation act as mixed type inhibitors with predominantly anodic action. [..]
Read more
WĘGLOWSKI Marek Stanisław Łukasiewicz – Institute of Welding, Gliwice, Poland, EU, marek.weglowski@is.gliwice.pl
Co-authors:
DWORAK Jerzy
DYMEK Stanisław
KALEMBA-REC Izabela
WRONA Adriana
KUSTRA Katarzyna
LIS Marcin
DOI: https://doi.org/10.37904/metal.2020.3562, 846-851
Abstract:
The plasma spray technology allows spraying a wide variety of materials. Atmospheric plasma spraying (APS) consists in injecting a powder feedstock material in a plasma jet to melt and accelerate the injected particles and spray them onto a substrate. [..]
Read more
ZÁLIŠ Vít Czech Aerospace Research Centre, Prague, Czech Republic, EU, zalis@vzlu.cz
Co-authors:
BÁRTA Jiří
DOI: https://doi.org/10.37904/metal.2020.3563, 852-857
Abstract:
The aim of this study is to compare the corrosion resistance of anodic oxidation coatings on Al2024 alloy. Due to its composition with a high content of alloying elements (mainly Cu), anodization of this alloy is one of the difficult ones compared to most other alloys or pure aluminium. [..]
Read more
BOHÁČIK Peter VZLU – Czech Aerospace Research Centre, Prague, Czech Republic, EU, bohacik@vzlu.cz
Co-authors:
BÁRTA Jiří
DOI: https://doi.org/10.37904/metal.2020.3564, 858-861
Abstract:
This paper reports on anti-reflective (ARCs) and UV rejection coatings on variety of surfaces. The anti-reflective coatings have evolved into highly effective reflectance and glare reducing surfaces. [..]
Read more
KIRAN Abhilash COMTES FHT a.s., Průmyslová 995, Dobřany, Czech Republic, EU, abhilash.kiran@comtesfht.cz
Co-authors:
HODEK Josef
VAVŘÍK Jaroslav
LUKÁŠ Ondřej
URBÁNEK Miroslav
DOI: https://doi.org/10.37904/metal.2020.3565, 862-867
Abstract:
Distortion in additively manufactured metal parts is of interest to keep structural reliability. It is important to control the dimensional tolerance of the additively manufactured structure. [..]
Read more
MAKSIMOVA Olga Cherepovets State University, Laboratory of Mathematical and Computer Modeling, Cherepovets, Russian Federation, og62@mail.ru
Co-authors:
SMIRNOV Valentin
OSIPOV Stepan
MENSHIKOV Evgenii
MAKSIMOV Andrei
EGOROV Vladislav
TRIFANOVA Alena
BAIDZHANOV Aleksander
OSIPOVA Nadezhda
DOI: https://doi.org/10.37904/metal.2020.3566, 868-873
Abstract:
To describe a surface morphology of textured polymer coatings, the model of polymer chains attached to spherical granules was developed. By means of the model, we revealed the influence of coating density on its surface morphology. [..]
Read more