Proceedings
Back
Conference Proceedings - METAL 2016
25th Anniversary International Conference on Metallurgy and Materials
May 25th - 27th 2016 / Hotel Voronez I, Brno, Czech Republic, EU
www.metalconference.eu
ISSN: 2694-9296
ISBN: 978-80-87294-67-3
Proceedings of the conference were published in Web of Science and Scopus.
Read
more
Past events
Table of Contents
Download
ZIDANI Mosbah Laboratoire de Génie Energétique et Matériaux, LGEM, University of Biskra, Algeria, zidani.sabih@gmail.com
Co-authors:
HADID Mohamed Djamel
DJIMAOUI Toufik
FARH Hichem
MESSAOUDI Salim
BESSAIS Lakhdar
MATHON Marie Hélène
BAUDIN Thierry
Abstract:
The purpose of this work is to study the evolution of the microstructure, mechanical and electrical properties of an aluminum alloy, depending on the deformation level and annealing treatment. The study was conducted on an AGS type aluminum wire used by the international company ENICAB of Biskra for electrical cabling. [..]
Read more
ŽUROVEC David VSB-Technical University of Ostrava, ENET Centre, Laboratory of Bulk Materials, Ostrava, Czech Republic, EU
Co-authors:
JEZERSKÁ Lucie
HLOSTA Jakub
ZEGZULKA Jiří
Abstract:
The main object of this article is to present methods of electrical waste sorting and the subsequent processing of its metallic component. Electrical waste grit is formed by the crushing of electric current cable conductors and consists of pieces of copper wires and plastic granulate. [..]
Read more
Zýka Jiří UJP PRAHA a.s., Prague, Czech Republic, EU, zyka@ujp.cz
Co-authors:
Andršová Irena
Málek Jaroslav
Podhorná Božena
Joch Antonín
Hrbáček Karel
Abstract:
MAR-M-247 is a nickel-base superalloy developed for applications requiring high strength at elevated temperatures up to about 1000 ºC. Its balanced composition provides an excellent combination of tensile and creep-rupture properties as a result of gamma-prime strengthening enhanced by solid solution and grain-boundary strengthening. [..]
Read more
BUKOWSKI Lech The University of Dąbrowa Górnicza, Poland, EU
Co-authors:
FELIKS Jerzy
MAJEWSKA Katarzyna
Abstract:
The objective of this paper is to come up with a concept of dynamic resilience modelling for the complex logistic systems with the example of logistic system of metallurgical plant. Based on the assumptions of service engineering, we propose a general model of logistics system, consisting of two parts representing both, the inward and the outward logistics in steel industry. [..]
Read more
MALINDŽÁK Dušan Technical University of Košice, Faculty of Mining, Ecology, Process Control and Geotechnology, Institute of Logistics, Slovakia, EU, dusan.malindzak@tuke.sk
Abstract:
The aim of steelworks macrologistics system to produce steel sheets is to create long-term conditions over the allocation of divisions and layout equipment (aggregates, machines, warehouses, manufacturing strategy), planning system and structure micrologistics system for the smoothest flow of material, maximum capacity utilization of production facilities, meet delivery dates these products of the required quality. Not suitable solution for macrologistics level creates on the micrologistics level situations with conflicting criteria of solution - dilemmas. [..]
Read more
MICHLOWICZ Edward AGH University of Science and Technology, Krakow, Poland, EU, e-mail: michlowi@agh.edu.pl
Co-authors:
ZWOLIŃSKA Bożena
Abstract:
Production is concerned with short throughput times and high schedule reliability in order to on the one hand, fulfill customer demands and on the other hand, increase planning reliability. The continuity of the flow of materials and information are influenced by many factors. [..]
Read more
NOSKIEVIČOVÁ Darja VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, darja.noskievicova@vsb.cz
Co-authors:
SKOUMALOVÁ Monika
Abstract:
Poka-yoke (mistake-proofing) is one of the lean manufacturing methods. It ensures that proper conditions exist before actually executing a process step, preventing mistakes from occurring in the first place. [..]
Read more
JAROŠOVÁ Eva ŠKODA AUTO University, Mladá Boleslav, Czech Republic, EU, jarosova@is.savs.cz
Abstract:
The paper deals with the problem of statistical process control (SPC) applied on the process of moulding tin coated cold rolled steel. The process level fluctuates around the historical mean, subgroup averages in the X-bar control chart show an extensive variation and as a result, frequent signals occur. [..]
Read more
TOŠENOVSKÝ Josef VŠB - Technical University Ostrava, Faculty of Metallurgy and Materials Engineering; Department of Quality Management. Ostrava, Czech Republic, EU, filip.tosenovsky@vsb.cz
Co-authors:
TOŠENOVSKÝ Filip
ŠAJTAR Lukáš
Abstract:
This paper presents a way to assess processes where more quality characteristics are observed. The method used concerns multivariate capability indices supported by graphical methods. [..]
Read more
ŠPIČKA Ivo VSB - Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava, Czech Republic, EU, ivo.spicka@vsb.cz
Co-authors:
HEGER Milan
TYKVA Tomáš
ŠPIČKOVÁ Dagmar
Abstract:
To verify the operation of heating furnaces is very suitable to measure directly on the heated material that is placed in a heating furnace. In the case of the furnace, where the material is shifted on the growth of the furnace, the situation is complicated and measuring is arduous. [..]
Read more
TYKVA Tomáš VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU & University of Business and Law, Ostrava, Czech Republic, EU, tykva@tykva.net, ivo.spicka@vsb.cz
Co-authors:
ŠPIČKA Ivo
HEGER Milan
ZIMNÝ Ondřej
Abstract:
Optimal control of reheating furnaces at metallurgical companies encounter difficulties resulting from the unevenness of the material through the furnaces because of their integration into broader technological lines. In terms of finding the optimal heating strategy, the use of the appropriate models of heating appears to be the cheapest approach. [..]
Read more
BURCHART-KOROL Dorota Central Mining Institute, Department of Energy Saving and Air Protection, Katowice, Poland, EU, dburchart@gig.eu
Abstract:
Natural resources management is one of the environmental policy priorities in steel industry. In the paper, attention was given to the potential of eco-effectiveness and circular economy concept for supporting decision-making related to the management of natural resources in steel production. [..]
Read more
ZAPLETAL František VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, Frantisek.Zapletal@vsb.cz , Jana.Zavacka1@vsb.cz
Co-authors:
ZÁVACKÁ Jana
Abstract:
European Union authorities effort to make the industrial companies to decrease the amount of CO2 emissions produced. The main instrument of the EU environmental policy is emissions allowances trading. [..]
Read more
ZAPLETAL Frantisek VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, Frantisek.zapletal@vsb.cz , lucie.chytilova@vsb.cz
Co-authors:
CHYTILOVA Lucie
Abstract:
In order to increase efficiency in production with respect to emissions production, the European trading system with emissions of CO2 has been established at the beginning of this millennium. The impact of this system on participating companies, even after one decade of its functioning, has been questioned many times in published studies. [..]
Read more
CHYTILOVÁ Lucie VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, lucie.chytilova@vsb.cz
Co-authors:
ZAPLETAL František
Abstract:
The global issue in all sectors is to increase the efficiency. In heavy industry as in steel sector, there is also a question about the environment – the production of emissions. [..]
Read more
POMYKALSKI Przemysław Lodz University of Technology, Piotrkowska 266, 90-924 Lodz, Poland, EU, ppomykalski@gmail.com
Abstract:
In recent years basic metal manufacturing companies faced major changes in their environment. The impact of those changes is evident in individual companies but can also be observed in accumulated data for the entire branch. [..]
Read more
FOJTÍKOVÁ Lenka VSB - Technical University of Ostrava, Faculty of Economics, Ostrava, Czech Republic, EU, lenka.fojtikova@vsb.cz
Abstract:
The steel sector plays a very important role for many countries, because of its broad industrial use. However, not all countries have the same factor endowment for steel production and trade. [..]
Read more
BRZÓSKA Jan Silesian University of Technology, Poland, EU, olko@polsl.pl
Co-authors:
KNOP Lilla
OLKO Sławomir
Abstract:
The purpose of the paper is presentation of wider tendency that occur in economy (and particularly in metal manufacturing sector): creation of ecosystems of cooperating entities, emerging in specific organizational forms. Progressive specialization of manufacturing entitles causes the formation of networks of actors in place of large organizations producing a diverse range of products. [..]
Read more
ZACZYK Mateusz Silesian University of Technology, Faculty of Organization and Management, Zabrze, Poland, EU, mateusz.zaczyk@polsl.pl
Abstract:
Logistic distribution systems’ dependability is a highly significant matter in today’s understanding of system’s ability to satisfy customer requirements, which usually are excessive and much individualized. A solution to such demands more and more often is the customization of offered goods, due to adapting postponement strategy. [..]
Read more
KUČEROVÁ Marta Slovak University of Technology Bratislava, Faculty of Materials Science and Technology in Trnava, Paulínska 16, 917 24 Trnava, Slovak republic, EU, marta.kucerova@stuba.sk, helena.fidlerova@stuba.sk, martina.horvathova@stuba.sk
Co-authors:
FIDLEROVÁ Helena
HORVÁTHOVÁ Martina
Abstract:
Process capability analysis is a part of the statistical process control, which is designed to monitor and regulate the process. The aim of statistical control is to maintain the manufacturing process at a level so that produced products have the required quality and meet the customer requirements. [..]
Read more