Proceedings
Back
Conference Proceedings - METAL 2019
28th International Conference on Metallurgy and Materials
May 22nd - 24th 2019 / Hotel Voronez I, Brno, Czech Republic, EU
www.metalconference.eu
ISSN: 2694-9296
ISBN: 978-80-87294-92-5
Proceedings of the conference were published in Web of Science and Scopus.
Read
more
Past events
Table of Contents
Download
Peterková Jindra VSB - Technical University of Ostrava, Faculty of Economics, Ostrava, Czech Republic, EU, jindra.peterkova@vsb.cz
Co-authors:
Czerná Katarzyna
Macurová Pavla
DOI: https://doi.org/10.37904/metal.2019.787, 1831-1837
Abstract:
Present conditions of highly competitive environment lead the owners and management of metallurgical enterprises to a strategic orientation on innovation, which is necessary for their durability and obtaining a significant market position. For efficient implementation of innovation activities, it is essential to compare with others and to look for ways to use the collected knowledge. [..]
Read more
INGALDI Manuela Czestochowa University of Technology, Faculty of Management, al. Armii Krajowej 19b p.309z, 2-200 Czestochowa, Poland, manuela.ingaldi@wz.pcz.pl; manuela@gazeta.pl
Co-authors:
DZIUBA Szymon T.
DOI: https://doi.org/10.37904/metal.2019.777, 1838-1843
Abstract:
Ribbed bars, like other metallurgical products, must meet the relevant requirements resulting from standards and specified by customers in their orders. The following dimensions of ribbed bars are specified in the standards: nominal diameter and their permissible deviations, mass range of 1 m of ribbed bar, core diameter, rib height, width and length of ribs longitudinal. [..]
Read more
TOŠENOVSKÝ Filip VSB - Technical University of Ostrava, Faculty of Materials Science and Technology, Department of Quality Management, Ostrava, Czech Republic, josef.tosenovsky@vsb.cz
Co-authors:
TOŠENOVSKÝ Josef
BLAŠTÍKOVÁ Marta
DOI: https://doi.org/10.37904/metal.2019.776, 1844-1850
Abstract:
The paper introduces modifications to the classical regression analysis that are deemed necessary when working with typical data from metallurgy, and foundry industry in particular. It specifically concerns the problem of multicollinearity, and shows both the practical application of the modified procedures and its consequences. [..]
Read more
MALČIC Tomáš VSB - Technical University of Ostrava, Faculty of Materials and Technology, Ostrava, Czech Republic, EU, tomas.malcic@vsb.cz
DOI: https://doi.org/10.37904/metal.2019.781, 1851-1856
Abstract:
The expedition warehouses are a key part of every distribution chain. Effective expedition warehouse management has a major impact on the overall quality of the finished products distribution process from manufacturer to customer. [..]
Read more
VILAMOVÁ Šárka VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, sarka.vilamova@vsb.cz, roman.kozel@vsb.cz, karel.barinka.st@vsb.cz, drahomir.foltan.st@vsb.cz, jakub.chlopecky@vsb.cz
Co-authors:
KOZEL Roman
BAŘINKA Karel
FOLTAN Drahomír
CHLOPECKÝ Jakub
DOI: https://doi.org/10.37904/metal.2019.784, 1857-1862
Abstract:
The article deals with possibilities of introducing innovations using new composite materials in the production and sale of precision rifle’s barrels. While other parts of weapons have undergone a number of design changes in the past, the barrel has not been altered. [..]
Read more
GRYCZ Ondřej VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, ondrej.grycz@vsb.cz
Co-authors:
PASKER Vít
HLAVICA Robert
ŠPAČKOVÁ Hana
MENŠÍK Martin
DOI: https://doi.org/10.37904/metal.2019.774, 1863-1867
Abstract:
The article deals with quality analysis of power grids especially in metallurgical industry when using large engines, arc furnace, induction heating and so on. Nowadays, these non-linear loads which are connected to power grids cause heavy disturbances, which can cause big problems like damage or even destruction of machines or devices connected near the point, where disturbances occur. [..]
Read more
SAMOLEJOVÁ Andrea VSB - Technical University of Ostrava, Faculty of Materials Science and Technology, Ostrava, Czech Republic, EU, andrea.samolejova@vsb.cz, dominika.kostelova.st@vsb.cz, martin.lampa@vsb.cz
Co-authors:
KOŠTĚLOVÁ Dominika
LAMPA Martin
DOI: https://doi.org/10.37904/metal.2019.771, 1868-1872
Abstract:
At the end of 2018, the unemployment rate in the Czech Republic was at its minimum for the last twenty years and the same applies within the framework of the EU member countries. Although being favourable in social terms, for companies this situation brings about large difficulties because they are unable to obtain qualified labour force, while costs connected with its finding and maintaining grow rapidly. [..]
Read more
VLCKOVA Vladimira University of Pardubice, Faculty of Chemistry, Pardubice, Czech Republic, EU, vladimira.vlckova@upce.cz, st41945@student.upce.cz
Co-authors:
BALASOVA Veronika
DOI: https://doi.org/10.37904/metal.2019.985, 1873-1879
Abstract:
This paper is dedicated to the problems of servitization and the possibilities of its application in metallurgy. It aims to identify the selected Czech steel manufacturers’, steel processors’ and casting manufacturers’ awareness of the servitization concept and to analyse the possibilities of its application at these companies. [..]
Read more
BESTA Petr VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, petr.besta@vsb.cz
Co-authors:
JANOVSKÁ Kamila
VILAMOVÁ Šárka
MALČIC Tomáš
DRASTICH Adam
SEZIMA Tomáš
DOI: https://doi.org/10.37904/metal.2019.979, 1880-1885
Abstract:
The production of iron in a blast furnace requires great quantities of feedstock. Some of the basic raw materials are ore constituents, fuel and other basic additives. [..]
Read more
BROŽOVÁ Silvie VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, silvie.brozova@vsb.cz
Co-authors:
RIGOULET Hana
ZBRÁNKOVÁ Monika
HAVRÁNEK Jaroslav
DOI: https://doi.org/10.37904/metal.2019.989, 1886-1891
Abstract:
The paper is focused on electrical and electronic waste and the associated waste. The generated amount of electronic waste, including mobile phones, supports the search for an efficient way to process this waste. [..]
Read more
DAVID Jiří VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, j.david@vsb.cz
Co-authors:
GARZINOVÁ Romana
PRAŽÁKOVÁ Veronika
SLÁČALA Jaroslav
DOI: https://doi.org/10.37904/metal.2019.983, 1892-1897
Abstract:
Computer Vision is currently one of the most advanced and fastest growing areas of computing and software development. It can be used to recognize objects from the captured image. [..]
Read more
LENORT Radim VSB - Technical University of Ostrava, Faculty of Materials Science and Technology, Ostrava, Czech Republic, EU, radim.lenort@vsb.cz
Co-authors:
DONOCIKOVÁ Eva
DOI: https://doi.org/10.37904/metal.2019.977, 1898-1904
Abstract:
The aim of the article is to research approaches and trends in the supplier selection and evaluation process in the metallurgical industry with focus on sustainable and resilience assessment. A systematic literature review of scientific articles containing case studies of selection and evaluation of metallurgical suppliers was chosen as a research method. [..]
Read more
DZIUBA Szymon T. Wroclaw University of Economics, Faculty of Engineering and Economics, ul. Komandorska 118-120, 3-345 Wroclaw, Poland, szymon.dziuba@ue.wroc.pl
Co-authors:
INGALDI Manuela
DOI: https://doi.org/10.37904/metal.2019.978, 1905-1910
Abstract:
Lean Management as well as different management systems require continuous improvement from enterprises. When looking for areas and ways to improve, the Kaizen philosophy, which is based on the principles of common sense, low-cost and implementation of change, should be taken into account. [..]
Read more
FRISCHER Robert VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, robert.frischer@vsb.cz
Co-authors:
SPACKOVA Hana
PRAZAKOVA Veronika
DOI: https://doi.org/10.37904/metal.2019.982, 1911-1916
Abstract:
The present state of energetic management is facing several issues, including force to lower production power consumption, to increase efficiency of the production and among others to eliminate financial penalties for energy spikes drawn from the power grid. Especially financial penalties can be eliminated keeping power consumption of the production line in specific boundaries and has immediate financial effect. [..]
Read more
KARDAS Edyta Czestochowa University of Technology, Czestochowa, Faculty of Production Engineering and Materials Technology, Czestochowa, Poland, EU, ekonstan@wip.pcz.pl
Co-authors:
PRUSAK Rafał
DOI: https://doi.org/10.37904/metal.2019.986, 1917-1922
Abstract:
Every company, including metal industry company, forces every day with the problem of the quantity of ordered and stored materials used in production processes. The quantity depends mainly on the cost of their ordering and storage as well as technological requirements of the production process. [..]
Read more
KAVAN Michal Czech Technical University in Prague, Faculty of Mechanical Engineering, Prague, Czech Republic, EU, michal.kavan@fs.cvut.cz
Co-authors:
ŠVECOVÁ Lenka
ŠULC Kryštof
DOI: https://doi.org/10.37904/metal.2019.996, 1923-1928
Abstract:
A brief overview of the status of European steel mills is the basis for the possibility of incorporating the Vroom-Yetton-Jago model in metallurgy. Not only in the Czech Republic, the steel industry is heavily influenced by the emerging applications of Industry 4.0, which will lead to new production standards and, at the same time, the pressure of global competition will increase. [..]
Read more
kliment Marek Technical University of Košice, Faculty of Mechanical Engineering, Department of Management, Industrial and Digital Engineering Slovak Republic, EU, marek.kliment@tuke.sk , peter.trebuna@tuke.sk
Co-authors:
trebuňa Peter
mizerák Marek
DOI: https://doi.org/10.37904/metal.2019.993, 1929-1935
Abstract:
The paper deals with steel surface treatment, blackening and phosphating of zinc and a production line that will perform these treatments. With the help of simulations were validated its various options and variants in which is able to work and produce. [..]
Read more
KONSTANCIAK Anna Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Czestochowa, Poland, UE, konstanciak.anna@wip.pcz.pl
DOI: https://doi.org/10.37904/metal.2019.991, 1936-1941
Abstract:
The article presents structural changes of blast furnace coke. Mass proportions of the crystalline phase
of coke before the blast furnace process and after heat treatment are presented. [..]
Read more
KOŠTĚLOVÁ Dominika VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, dominika.kostelova.st@vsb.cz, andrea.samolejova@vsb.cz
Co-authors:
SAMOLEJOVÁ Andrea
DOI: https://doi.org/10.37904/metal.2019.981, 1942-1947
Abstract:
Metallurgy is one of the key areas of the Czech processing industry. It is closely intertwined with the supply and demand, construction, mining, energy and transportation areas/industries. [..]
Read more
KUTÁČ Josef VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, josef.kutac@vsb.cz, tomas.kutac@vsb.cz, kamila.janovska@vsb.cz, eva.svecova@vsb.cz
Co-authors:
KUTÁČ Tomáš
JANOVSKÁ Kamila
ŠVECOVÁ Eva
DOI: https://doi.org/10.37904/metal.2019.980, 1948-1954
Abstract:
The article deals with the ways of the most accurate calculation in the intercompany prices of the cooperating centres activities, which transmit their activities in such a way that transfer cycles occur. Examples include mutual transfers of Maintenance and Energy centres, where activities is transferred from Maintenance to Energy and also from Energy to Maintenance centre [1]. [..]
Read more